ASTM D5630 Accredited Testing Labs Worldwide
14 accredited laboratories in 3 countries hold ASTM D5630 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation. In the register, ASTM D5630 scope entries most often cover Ash Content, Density, Density / Specific Gravity in Plastics, Cables, Drinking water.
Available in 3 Countries
Top matrices for ASTM D5630
Top analytes for ASTM D5630
- Ash Content (2)
- Density (1)
- Density / Specific Gravity (1)
- Izod Pendulum Impact Resistance (1)
- Ph (1)
- Specific Gravity (1)
Sample labs
ASTM D5630; ISO 1172; NES M0007 [2014-N], Sect. 10; TSM0501G [REV. 16], Sect. 9.24 Melt Flow ASTM D1238, Procedure A; TSM0501G [REV. 16], Sect. 9.10 Coefficient of Friction HES D6506 [REV.5], Section 5.23; TSL5100G
ASTM D5630 (Procedure B); ISO 3451-1 (Method A) .
Test Standard Adhesion and Peel Strength (continued) GMW 14892, 14829, 16005, 16443, 14695, 14757, 15851 (4.1.3.6.2); HINO HTSH1503; HONDA HES D6501 (3.6); HYUNDAI M3706-M-01 (4.2), MS700-60 (4.3, 4.4, 4.9, 4.12, 4.13, 4.14, 4
ASTM D5630 (Procedure B); ISO 3451-1 (Method A) Coefficient of Linear Thermal Expansion with a Push-Rod Dilatometer ASTM E228 Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ASTM E831; ISO 11359-1, -2
ASTM D5630 Standard Test Method for Ash Content in Plastics RUBBER AND FOOD CONTACT ASSESSMENT Test Method Test ARDL 3171 Formula Evaluation and Extractable Testing 21 CFR 177.2600 Rubber Articles Intended for Repeated Use STATE
ASTM D5630 (Method B); Ford FLTM BO 006-01, FLTM BO 006-02, FLTM BV 150-10, FLTM BV 150-12; ISO 1172, ISO 3451, ISO 6964 Film Thickness ASTM D4138 (Procedure A); GM9518P (1988); ISO 2808 (Methods 6A-1, 6B) Flammability ASTM D64
ASTM D5630 (Procedure B); ISO 3451-1 (Method A) Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis ASTM E831 Thermogravimetric Analysis ASTM E1131 Charpy Impact ISO 179-1 Determination of the Fogging
ASTM D5630 Chromatography Ion Chromatography ASTM D4327 Cleanliness ISO 16232 Coating Mass / Unit Area ASTM B767 Coating Weight (Zn) ASTM A90/A90M Combustion Analysis – LECO (C, H, O, N, S) ASTM E1019, E1409, E1447, E
ASTM D5630 Durometer Hardness ASTM D2240 (Shore A and D) Surface Resistivity ASTM D257
ASTM D5630 Total Solids ASTM D1076 Section 8 Suspended Solids by Centrifuge TP-MT-1050 Brookfield RVT Viscosity ASTM D1824
ASTM D5630, Method B Inorganic Ash Levels ASTM D6980 Moisture Analysis
ASTM D5630 Ignition Loss ASTM D2584 Fourier Transform Infrared Spectroscopy (FTIR) ATR ASTM E1252 FTIR Microscope ASTM E334 FTIR Rubber Analysis ASTM D3677 Chemical Composition (OES) Low-alloy Steel (Al, B, C, Ca, Co, Cr, Cu, Mn, Mo
ASTM D5630 (Method B) ISO 3451-1 (Method A) Flexural Modulus ASTM D790 ISO 178 Izod Im pact ASTM D256 ISO 180 (Method A) Melt Flow Rate ASTM D1238 (Method A) ISO 1133-1 S pecific Gravity ASTM D792 (Method A) IS
ASTM D5630 (Procedure B)