ISO 7637-1 Accredited Testing Labs Worldwide
20 accredited laboratories in 9 countries hold ISO 7637-1 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Deutsche Akkreditierungsstelle, United Kingdom Accreditation Service. In the register, ISO 7637-1 scope entries most often cover Emf, Voltage in Air, Vehicles.
Available in 9 Countries
Top matrices for ISO 7637-1
Top analytes for ISO 7637-1
- Emf (1)
- Voltage (1)
Sample labs
ISO 7637-1; ISO 7637-2; ISO 7637-2: 2004; ISO 7637-3
ISO 7637-1; GB/T 21437.2; GB/T 21437.3; EN 50498; BS EN 50498 Conducted Transient Emission SAE J1113-42; ISO 7637-2; ISO 7637-4; GB/T 21437.2; EN 50498; BS EN 50498 Radiated Immunity from Portable Transmitters ISO 11452-9; GB/T
ISO 7637-1:2002 Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations EMV ISO 7637-1:2023 Road vehicles - Electrical disturbances from conduction and coupling - Part 1:
ISO 7637-1; ISO 7637-2; Hyundai/Kia ES 96200-00; ECE R10.07 Conducted Transient Immunity (CTI) ISO 7637-1; ISO 7637-2; ISO 7637-3; ISO-16750-2; ISO 16750-2 (2012); Hyundai/Kia ES 96200-00; ECE R10.07 Stripline Test (Immunity)
ISO 7637-1; ISO 7637-2; SAE J1113-42 Electrical Transient Conduction Along Supply Lines Only ISO 7637-2; GB/T 21437.2; SAE J1113-11 Conducted Transient Immunity on Non-Supply Lines ISO 7637-3; GB/T 21437.3;
ISO 7637-1:2002 Road vehicles - Electrical dist urbances from conduction and coupling - Part 1: Definitions and general considerations EMV ISO 7637-1:2015 Road vehicles - Electrical dist urbances from conduction and coupling - Part 1:
ISO 7637-1: 2015 ISO 7637-1: 2023 Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations EMV ISO 7637-2: 2011 Road vehicles -- Electrical disturbances from conduction
ISO 7637-1, ISO 7637-2, ISO 7637-3, ISO 7637-4 Measurement uncertainty increases with larger reflection factors. Amplitude Modulation3 – Measure 9kHz to 7 GHz (5 to 95) % 2.5 %
ISO 7637-1:1990 A, C Testing ISO 7637-2:1990 12 and 24 V ISO 7637-2:2004, pulses 1, 2a, 2b, Emissions and 3a, 3b and 4 only ISO 16750-2:2012 Section 4.6.3 (starting profile) and 4.6.4 (load dump) Immunity 2004/104/EC Anne
ISO 7637-1:1990, except Pulse 5 A, B Transient Testing ISO 7637-2:1990, except Pulses 1, 12 and 24 v 2, 5 Emissions and Immunity ISO 7637-2:2004 ISO 7637-2: 2011 ISO 7637-3:1995 Harmonics & Fli
ISO 7637-1:2015 Straßenfahrzeuge – Elektrische Störungen durch Leitung und Kopplung – Teil 1: Definitionen und Allgemeines. EMV ISO 7637-2:2011 Straßenfahrzeuge – Elektrische, leitungsgeführte und gekoppelte Störungen – Teil 2: El
ISO 7637-1; ISO 7637-2; ISO 7637-2 (2004); ISO 7637-4 Electrical Loads ISO 16750-1; ISO 16750-2; ISO 16750-2 (2006; 2012) Electrical Tests for Voltage Class B Systems and Components ISO 21498-1; ISO 21498-2
Fachbereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Einschränkungen zum Prüfverfahren Mobilität - Automotive Equipment EMV DIN EN IEC 55025: 2023-11 Fahrzeuge, Boote und von Verbrennu
ISO 7637-1, ISO 7637-2 (2004, 2011), ISO 7637-3 & JASO D-001-94 Magnetic Field3 – Measure Current Magnetic Field Distortion Coil factor Up to 100 A (0.01 to 100) µT 45 Hz to 4 kHz Up to 10 µT
This document is a translation. The definitive version is the original German annex to the accreditation certificate. Technical field Standard / In-house procedure / Version Title of standard or in house procedure (deviations / mod
ISO 7637-1: 2015 Road Vehicles – Electrical disturbances from conduction and coupling – Part 1: Definitions and general considerations EMV ISO 7637-2:2011 Road Vehicles – Electrical disturbances from conduction and coupling – Pa
ISO 7637-1:1990 ISO 7637-1:2015 ISO 7637-2:1990 (pulses 1, 2, 3a, 3b and 5) ISO 7637-2:2011 ISO 7637-3: 2007 ISO 7637-3:2016 (excluding DCC method) ISO 11452-2:2012 (pulses 4, 5a, 5b load dump)
ISO 7637-1 Electromagnetic Compatibility General Information SAE J1113-1 Vehicle Electrical/electronic Sub-assembly Electromagnetic Compatibility ECE R10 Electromagnetic Compatibility- Aftermarket Electronic Equipment in Vehicle
ISO 7637-1 (2002) + A1 (2008); ISO 7637-2 (2004) + A1 (2008) Section 4.3 Conducted Transient Immunity ISO 7637-2; ISO 7637-2 (2011); ISO 7637-2 (2004) + A1 (2008) Sections 4.4, 5.6.1 to 5.6.5;
ISO 7637-1; ISO 7637-2, 2004/104/EC; UN ECE R10.04; EN 60945; IEC 60945; EN 14982; ETSI EN 301 489-1 through ETSI EN 301 489-52; EN 301 908-1 through EN 301 908-22; 3GPP TS 38.114 On the following products or types of products: