ISO 7637-3 Accredited Testing Labs Worldwide

Test Technology: Test Method(s): Generic and Product Specific Standards (cont.) EN 301489-19; EN 301489-50; EN 301489-52; EN 300386; EN 300386 V1.6.1; EN 300386 V2.1.1; EN 300386 V2.2.1; EN 55035; EN 55035:2017; BS EN 55035;

ISO 7637-3 Off-Vehicle Radiation Sources ISO 11451-2 Harness Excitation Methods ISO 11451-4 Absorber Lined Chamber ISO 11452-2 Transverse Electromagnetic (TEM) Cell ISO 11452-3 Bulk Current Injection (BCI) ISO 11452-4 E

ISO 7637-3:2007* Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines Auto- motive ISO 7637-3:2016

ISO 7637-3:2016; ISO 10605:2023; ISO 10605 (2008); ISO 10605 (2008) + A1 (2014); ISO 11452-2 (2019); ISO 11452-4 (2020); ISO 11452-4 (2011); ISO 11452-8 (2015); ISO 11452-9 (2012); ISO 11452-9 (2021); ISO 16750-2:2012; ISO 16750-

ISO 7637-3: 2016 Third edition Road vehicles - Electrical disturbances from conduction and coupling – Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 13766-

ISO 7637-3:2016 EMC _ Dispositivi elettrici ed elettronici per applicazione veicolistiche/Electrical and electronic applications for vehicular, Veicoli/Vehicles Denominazione della prova / Campi di prova Prove di immunità a scariche di

ISO 7637-3 (excluding DCC test method) Product Family Standards ECE Regulation No.10 (Annex 7, 8, 9 (Appendix 3, 4), 10); IEC/EN 60601-1-2 Product Safety Audio/video, Information and Communication Technology Equipment EN 62368-

ISO 7637-3 Keine leitungsgebundene Emission Nur Stromversorgungs- netznachbildungen Feldgebundene Emission bis 1GHz Kein HV EMV CISPR 25:2002-08 + Cor.1:2004-03 Vehicles, boats and internal combustion engines - Radio distu

ISO 7637-3; ISO 16750-2 Absorber Lined Shielded Enclosure (ALSE) RF Immunity (80 MHz to 6 GHz) Up to 200 V/m (Metallic Bench Only) Up to 600 V/m (Radar Pulse Only) ISO 11452-2; E/ECE/324/Add. 9 R10 (section 6.8) TEM C

ISO 7637-3

ISO 7637-3, ISO 16750-2:2012, ISO 16750-2, JASO D 001 Standard equipment: oscilloscope

ISO 7637-3:2016 Prove di immunità/Immunity tests - solo/only Annex 9; Escluso/excluding Impulso 5 ed emissioni irradiate/pulse 5 and Radiated emissions UNECE 116R01/01 (2023) Dispositivi elettromeccanici per circuiti di comando/Electrome

ISO 7637-3 2016/05 Straßenfahrzeuge - Elektrische Störungen durch Leitung und Kopplung Teil 3: Fahrzeuge mit 12-V- oder 24-V-Bordnetz- Nennspannung; Übertragung von impulsförmigen elektrischen Störgrößen durch kapazitive und induktiv

ISO 7637-3; ISO 7637-4; ISO 7637-1; GB/T 21437.2; GB/T 21437.3; EN 50498; BS EN 50498 Conducted Transient Emission SAE J1113-42; ISO 7637-2; ISO 7637-4; GB/T 21437.2; EN 50498; BS EN 50498 Radiated Immunity from Portable Transmitte

ISO 7637-3:1995 Pulse types 1, 2, 3a, 3b, 4, 5, 6 & 7 ECE Regulation 10.6** EN 50498:2010

Bereich Norm / Hausverfahren / Version Titel der Norm oder des Hausverfahrens Prüfbereich / Einschränkung EMV OIML 011:2013 General requirements for measuring instruments - Environmental conditions Nur Prüfungen nach 12.3: Ta

ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 7637-3:2016 Road vehicles

ISO 7637-3 2016-07 Ed 3.0 Elektromagnetische Verträglichkeit (EMV) in Straßenfahrzeugen; eingekoppelte Störungen auf Geber- und Signalleitungen im 12-V und 24 V-Bordnetz ISO 11451-2 2015-06 Ed 4.0 Road vehicles -- Vehicle test m

ISO 7637-3:2016 Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMC ISO 11452-2:2004 ISO 11452

ISO 7637-3; ISO 16750-2; GB/T 21437.3; GB/T 28046.2; SAE J1113-12 1 When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that immediately precedes the current vers

ISO 7637-3; ISO-16750-2; ISO 16750-2 (2012); Hyundai/Kia ES 96200-00; ECE R10.07 Stripline Test (Immunity) ISO 11452-5 1When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use

ISO 7637-3; GB/T 21437.3; SAE J1113-12 Electrostatic Discharge (ESD) ISO 10605 (Sections 8 and 9 only); GB/T 19951; SAE J1113-13 Bulk Current Injection (BCI) ISO 11452-4 (excluding TWC test method); GB/T 33014.4; SAE J1

ISO 7637-3:2016-07 Straßenfahrzeuge - Elektrische Störungen durch Leitung und Kopplung - Teil 3: Fahrzeu- ge mit 12 V oder 24 V Bordnetz-Nennspan- nung; Übertragung von impulsförmigen elek- trischen Störgrößen durch kapazitive und indukti

ISO 7637-3:2007 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 7637-3:2016 Road vehicles

ISO 7637-3:2007 Road vehicles - Electrical dist urbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 7637-3:2016 Road vehicles

EMV ISO 7637 -2:2011 Road vehicles - Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only EMV ISO 7637 -3:2016 Road vehicles - Electrical disturbances from c

ISO 7637-3 Fast and slow / Electric transient disturbance from coupling to signal lines Capacitive or inductive coupling Oscilloscope, transient generator, attenuator, power resistor, voltage probe, coupling voltage or current c

ISO 7637-3:2016 - escluso/except § 4.6- DCC method _ EMC _ Dispositivi elettrici ed elettronici per applicazione veicolistiche/Electrical and electronic applications for vehicular, Veicoli/Vehicles Denominazione della prova / Campi di

ISO 7637-3 2016/07 Road vehicles - Electrical disturbance from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines SDS EMV ISO/DTS 7637 -4 20

ISO 7637-3 Electrical Loads ISO 16750-2 Emissions Harmonics and Flicker EN 61000-3-2; IEC 61000-3-2; AS/NZS 61000.3.2; SANS 61000-3-2; EN 61000-3-3; IEC 61000-3-3; AS/NZS 61000.3.3; SANS 61000-3-3 Conducted (Excluding Broadcas

Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen 1.6 Kraftfahrzeuge (Automotive) EMV ISO 7637 -2:2011 -03 Straßenfahrzeuge - Elektrische, leitungsgeführte und g

ISO 7637-3: 2016 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 10605:2008+CORR1:

ISO 7637-3; ISO 16750-2 (excluding ISO 11451, ISO 11452-3/5/10 and CISPR 12)

Bereich Norm / Hausverfahren / Version Titel der Norm oder des Hausverfahrens Prüfbereich / Einschränkung EMV ISO 7637 -2 Third Edition 2011- 03-01 (2011-03) Road vehicles – Electrical disturbances from conduction and coupling –

ISO 7637-3; SAE J1113-12 Immunity to Magnetic Fields ISO 11452-8 Conducted Transient Emissions ISO 7637-2 Immunity to Portable Transmitters ISO 11452-9

ISO 7637-3; ISO 7637-4; UN ECE Regulation 10 (Annex 10) Electrical Loads ISO 16750-2 Tri-Plate Line Method SAE J1113-25 Emissions Radiated ANSI C63.4 (up to 18 GHz) Conducted ANSI C63.4 (150 kHz to 30 MHz); CISPR 16-2-1 (Me

ISO 7637-3 (2007, 2016); ISO 7637-3; SAE J1113-12; ECE Regulation 10.06, Annex 10 Electrical Loads (Dropouts) ISO 16750-2 (2023); ISO 16750-2 (2010, 2012); ISO 16750-2; SAE J1113-13 Automotive Electrical Tests of the following ty

ISO 7637-3 ESD Simulators3 – Contact Voltage Peak Current (T1, T2) Rise/Fall Time ± (750 to 40k) V ± (0.07 to 150) A (0.4 to 1.3) ns 0.5 % 3.7 % 8.6 % HV meter Oscilloscope + ESD Target

ISO 7637-3 (2007, 2016) (Capacitive & Inductive Coupling via other than supply lines); ECE Regulation 10.05 Annex 10; ECE Regulation 10.06 Annex 10 Transient Emissions ISO 7637-2 (2004, 2011); ECE Regulation 10.05 Annex 10; ECE

Fach- bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen 4 KFZ EMV DIN EN 55012 2010-04 Fahrzeuge, Boote und von Verbrennungsmotoren angetriebene Geräte -

ISO 7637-3; ISO 13766-1; ISO 13766-2 ISO 14982; ISO 16750-2; UNECE Regulation 10, Revision 6, Electronic Sub-assemblies (ESA), Sections 6.7, 6.9, 7.17, 7.19 Wireless (Excluding HAC & SAR) ANSI/T

ISO 7637-3, ISO 16750- 2, MIL-STD-461G, MIL- STD-1275E Tektronix DPO4102B, Tektronix P6015A Tektronix DPO4102B, Pearson 110, Pearson 4997, Pearson 4418, Weinschel 24-20-34-LIM, Weinschel 24-40-34-

ISO 7637-3:2016-07 Edition 3 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 10605:200

ISO 7637-3: 2016 Range 12VDC - 24VDC, Level I - IV Fordonskomponenter Nej Only test method CCC and ICC Förändrade omfattningsrader är markerade med fetstil. Sida 1 (1)

ISO 7637-3:2016 Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV / EMC ISO 10605:2023 Road ve

ISO 7637-3) Vedere elenco dei dettagli delle prove flessibili/See list of flexible scope details Misure di emissione/Measurements of emission (CISPR 25) Prove di immunità a radio frequenza/Radio frequency immunity tests (ISO 11452-1, I

ISO 7637-3:1995 Harmonics & Flicker ISO 7637-3: 2007 Burst & Surge ISO 7637-3:2016 ISO 16750-2: 2006 ISO 16750-2: 2010 ISO 16750-2: 2012 ECE Regulation 10.04 Annexes 10, 11, 12, 15 & 16 ECE Regulation 10.05

Fachbereich Norm / Prüfverfahren (Ausgabestand) Titel der Norm oder des Prüfverfahrens Einschränkung 1.3 Produktfamiliennormen EMV OIML R99 -1&2:2008 Instruments for measuring vehicle exhaust emissions, Part 1: Metrological and

ISO 7637-3 (2016); GMW 3097 (2022), Section 3.5.3; CS.00244 (2023), Section 5.2.19; TL81000 (2021), Section 5.4.4

ISO 7637-3:2007 Straßenfahrzeuge – Elektrische Störungen durch Leitung und Kopplung – Teil 3: Fahrzeuge mit 12 V oder 24 V Bordnetz-Nennspannung; Übertragung von impulsförmigen elektrischen Störgrößen durch kapazitive und induktive Kopp