ISO 7637-3 Accredited Testing Labs Worldwide

ISO 7637-3:1995 ISO 7637-3:2007 ISO 7637-3:2016 Ford ES-XW7T-1A278-AB:1999 Section CI 210, CI 220, CI 230 CI 240, CI 250, CI 260 & CI 270 UNECE Regulation 10.06 including Amendment 1: 2020

ISO 7637-3; ISO 7637-3 (2007); SAE J1113-12 Conducted Transient Emissions ISO 7637-1; ISO 7637-2; ISO 7637-2 (2004); ISO 7637-4 Electrical Loads ISO 16750-1; ISO 16750-2; ISO 16750-2 (2006; 2012) Electrical Tests for Voltage Class

ISO 7637-3; GB/T 21437.3; ISO 16750-2 Magnetic Field Immunity Testing GB/T 33014.8; ISO 11452-8

ISO 7637-3:2016 Road vehicles - Electrical dist urbances from conduction and coupling - Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO/DTS 7637-4:2020-01 Road

Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMV ISO 7637 -3:2007 Road vehicles - Electrical disturbances from conduction and coupling Part 3:Electrical tra

Fachbereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Einschränkungen zum Prüfverfahren Mobilität - Automotive Equipment EMV DIN EN IEC 55025: 2023-11 Fahrzeuge, Boote und von Verbrennu

ISO 7637-3 & JASO D-001-94 Magnetic Field3 – Measure Current Magnetic Field Distortion Coil factor Up to 100 A (0.01 to 100) µT 45 Hz to 4 kHz Up to 10 µT 1.9 % 2.7 % 2.7 % of indicate

This document is a translation. The definitive version is the original German annex to the accreditation certificate. Technical field Standard / In-house procedure / Version Title of standard or in house procedure (deviations / mod

ISO 7637-3:2016 Road Vehicles – Electrical dist urbances from conduction and coupling – Part 3: Electrical transient transmission for capacitive and inductive coupling via lines other than supply lines; 2016

ISO 7637-3:2016 Straßenfahrzeuge - Elektrische Störungen durch Leitung und Kopplung - Teil 3: Fahrzeuge mit 12 V oder 24 V Bordnetz- Nennspannung; Übertragung von impulsförmigen elektrischen Störgrößen durch kapazitive und induktive Kop

ISO 7637-3 (CCC only); ISO 16750-2 (Load Dump) Electrostatic Discharge Testing ISO 10605 Continuous Power Line Disturbances Immunity ISO 11452-10 Emissions Radiated and Conducted Emissions 47 CFR FCC Part 15B, (using ANSI C63

ISO 7637-3; ISO 7637-4; ISO 16750-2, Sections 4.6.3 and 4.6.4; ISO 21498-1; ISO 21498-2; CS.00054, Section 5.9; CS.00244 Section 5.2.15 through 5.2.21; CS.00245; CS.00246 Section 5.2.4; EMC-CS-2009.1 (CI220); FMC1278 (CI220, CI221, C

ISO 7637-3; ISO 16750-2; GB/T 21437.3; GB/T 28046.2; SAE J1113-12 Harmonic Emissions IEC 61000-3-2; EN 61000-3-2; GB 17625.1 Voltage Fluctuations and Flicker IEC 61000-3-3;

ISO 7637-3; SAE J1113-12 Electrical Loads ISO 16750-2; JASO D001-94 Product Family / Generic Standard IEC 61000-6-1; EN 61000-6-1; KS C 9610-6-1; SANS 61000-6-1; IEC 61000-6-2; EN 61000-6-2; KS C 9610-6-2;

ISO 7637-3; ISO 16750-2; SAE J1113-11, 12; ES 96200-00; RNDS-C-00517; ETSI EN 301 489-1 (7637-2(2004) only) Magnetic Field Immunity SAE J1113-22; ISO 11452-8; ES 96200-00; RNDS-C-00517 1 The laboratory is only accredited fo

ISO 7637-3; ISO 7637-4; ECE R10; GB/T 21437.2; GB/T 21437.3; GB/T 36282; VW TL82366; VW TL81000; Jaguar JLR-EMC-CS-2010; Jaguar JLR-EMC-CS; GMW3097; Ford EMC-CS-2009.1; Ford FMC1278; BMW GS-95003-2; BMW GS-95024-2-1; BMW GS-

ISO 7637-3:2007 (sections 3, 4); ISO 7637-3:2016 (sections 3, 4); GB/T 21437.3-2012 (sections 3, 4); GB/T 21437.3-2021 (sections 4, 5, Annex A, Annex B, Annex C) Radiated Immunity – ALSE Method (80 MHz to 6 GHz, up to 200 V/m

ISO 7637-3; ISO 7637-3 (2007, 2016) (Capacitive & Inductive Coupling via other than supply lines) The United Nations Economic Commission for Europe (UNECE)) ECE UN Regulation 10 Radio Australia ACMA Radiocommunications (Short Rang

ISO 7637-3: 2007 ISO 7637-3:2016 (excluding DCC method) ISO 11452-2:2012 (pulses 4, 5a, 5b load dump)

ISO 7637-3; SAE J1113-12 Electrical Loads ISO 16750-2 Transient Conduction and Coupling Definitions and General Considerations ISO 7637-1 Electromagnetic Compatibility General Information SAE J1113-1 Vehicle Electrical/elec

ISO 7637-3; ISO 16750-2 (excluding section 4.10.3); GB 34660 (section 4.8); GB 26149 (section 5.1); GB/T 21437.3; GB/T 22630 (section 6.3); GB/T 30513 (section 4.3.2.1); GB/T 36282 (sections 4.2.2 and 5.2.2) Absorber Lined Shi

ISO 7637-3; FMC 1278; RI 130; RI 150; GMW3097, Sections 3.5.3 to 3.5.5 Bulk Current Injection (BCI) (Substitution and Closed-Loop Methods) ISO 11452-4; FMC 1278; RI 112; GMW3097, Section 3.4.1

ISO 7637-3; BS ISO 7637-3; EN 50498 (Section 7.4); BS EN 50498; ECE R10; BS ISO 7637-2; BS EN ISO 14982; EN ISO 14982; BS EN ISO 13766-1; EN ISO 13766-1; BS EN ISO 13766-2; EN ISO 13766-2; SAE J1113-11; SAE J1113-12 Portable Transm

ISO 7637-3; ECE R10-06; SAE J1113-11; SAE J1113-12; GB/T 21437.2; GB/T 21437.3; ISO 13766-1; Q/JX 08140; BT-SGMWJ 08244.9; Q/LQB S-52 Conducted Transient Emission ISO 7637-2; GB/T 21437.2; SAE J1113-11; ECE R10-06; SAE J1113-12; I

ISO 7637-3 Harmonics and Interharmonics IEC 61000-4-13; EN 61000-4-13; BS EN 61000-4-13 Electromagnetic Fields (EMF) IEC 62233; EN 62233; BS EN 62233 Product Standards IEC 61547; EN IEC 61547; BS EN IEC 61547; CISPR 14-2; EN IEC 5

Testing field Standard / In- House Procedure / Version Title of Standard or In-House Procedure (Deviations / Modifications of Standard) Test Range / Restrictions EM C ISO 7637 -2:2011 Road vehicles – Electrical disturbances from

ISO 7637-3:2016-07 Road vehicles-Electrical disturbances from conduction and coupling-Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV DIN EN 12895:2020 (EN 12895:

ISO 7637-3; On the following products and materials: Information Technology Equipment (ITE), Multimedia Equipment, Automotive Electronic Equipment, Radio Equipment, Household Appliances, Industrial, Scientific, and Medical (ISM) Radio

ISO 7637-3:2016 Road vehicles -Electrical disturbances from conduction and coupling, Part3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 10605:2008-07 Road vehicles

ISO 7637-3; ISO 7637-3 (2007, 2016); SAE J1113-12 Electrostatic Discharge (ESD) ISO 10605 (excluding clause 10 vehicle test method) ISO 10605:2023; ISO 10605 (2001); ISO 10605 (2008)

ISO 7637-3 (2007) Sections 3.4.2, 3.4.3, 3.4.4; ISO 16750-2; ISO 16750-2 (2023); ISO 16750-2 (2012); ISO 16750-2 (2006) Electrostatic Discharge (ESD) ISO 10605; ISO 10605 (2023); ISO 10605 (2008) + A1 (2014); ISO 10605 (2008) (exc

ISO 7637-3:2016-05 Straßenfahrzeuge - Elektrische Störungen durch Leitung und Kopplung – Teil 5: Definitionen und allgemeine Übertragung elektrischer Transienten durch kapazitive und induktive Kopplung über andere Leitungen als Versorg

ISO 7637-3:2016-07 Road vehicles - Electrical d isturbances from conduction and coupling - Part 2: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines EMV ISO 10605: 2023-06 Road v

ISO 7637-3:2007, ISO 7637-3:2016 _ Dispositivi elettrici ed elettronici per applicazione veicolistiche/Electrical and electronic applications for vehicular, Veicoli/Vehicles Denominazione della prova / Campi di prova Metodo di prova Te

ISO 7637-3 Radio Communications Intentional Radiators 47 CFR Part 15C, E (using ANSI C63.10-2013 and/or FCC KDB 905462 D02 (v02)); 47 CFR Part 15D (using ANSI C63.17:2015); 47 CFR Parts 22, 24, 25, 27, 30, 74, 90, 95, 96, 97, an

ISO 7637-3; ISO 16750-2 (Sections 4.3, 4.4, 4.5, 4.6, and 4.7)