ASTM D648 Accredited Testing Labs Worldwide

ASTM D648 Diesel/Oil/Bioblends Photovolt Reflectance Meter

ASTM D648; UL 746A Hot Wire Ignition (HWI) ASTM D3874; UL 746A

ASTM D648 (Method A) Compression Properties of Rigid Plastics ASTM D695 Flexural Properties of Unreinforced & Reinforced Plastics & Electrical Insulating Materials ASTM D790 Density & Specific Gravity (Relative Density) of Pl

2.3 Tensile test ** ASTM D 648 2018 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position ISO 527-1 2019-07 Plastics - Determination of tensile properties - Part 1: General prin

ASTM D648; Vicat Softening Temperature(VST) GB/T 1633; ASTM D1525 Melt Mass Flow Rate and Melt Volume Flow Rate GB/T 3682.1; ISO 1133-1; ASTM D1238 Insulation resistivity GB/T 1692 Xenon-Arc Sources Test SAE J2412; SAE J25

ASTM D648 Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position ASTM D695 Compressive Properties of Rigid Plastics ASTM D2196 Rheological Properties of Non-Newtonian Materials by Rotational Viscometer ASTM D22

ASTM D648 (Method B); ISO 75-1, -2 Flexural Properties ASTM D790; ISO 178 Density and Specific Gravity ASTM D792 (Method A); ISO 1183-1 (Method A) Melt Flow Rate ASTM D1238; ISO 1133-1 Color Measurement by Data Color, C

ASTM D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Ed gewise Position ASTM D695 Test Method for Com pressive Properties of Rigid Plastics ASTM D732 Test Method for Shear Stren gth of Pla

ASTM D648; ISO 75-1, 75-2; JIS K7191-1, JIS K7191-2 Vicat Softening Point/Temperature (VST) UL746A, UL746C; ASTM D1525; ISO 306; JIS K7206 Relative Thermal Endurance Index (RTE, RTI) IEC 60216-5, IEC 61730

ASTM D648 Burning behavior -FMVSS302 / DIN 75200 -UL 94 V / HB Burning behavior foams -FMVSS 302 / DBL 5307 Glow wire test EN 60695-2-13 Textiles and textile products At least once a year Melting point and enthalpy Burning

ASTM D648 (Method B), ASTM D1525; ISO 75, ISO 306; Toyota BSDM 0501, TSM 0501G Humidity / Autoclave Exposures ASTM D1735, ASTM D2247, ASTM D3574 Test J, ASTM D4585; CFFA-110; Ford FLTM BO 012-01, FLTM BQ 104-02; GM9215P (1988);

ASTM D648 (Method B); ISO 75-1, -2 Brittleness Temperature ASTM D746; Toyota TSM0501G Rockwell Hardness (Scale R) ASTM D785 Flexural Properties ASTM D790; ISO 178 Density and Specific Gravity ASTM D792 (Method A); ISO 11

ASTM D648; TSM 0501G

ASTM D648 Plastic, Composites and Polymers Tensile (Loads: 0.05N to 100 kN) (Temperature range -50°C to +250°C) (Strain to 1000%) BS EN ISO 527-1 BS EN ISO 527-2 BS EN ISO 527-3 BS EN ISO 527-4 BS EN ISO 527-5 ASTM D638 P

ASTM D648, Method A Impact Gardner Notched Unnotched Izod ASTM D5420 ASTM D256, Method A ASTM D4812 Melt Flow ASTM D1238 Tear Resistance ASTM D1004 Trouser Tear ASTM D1938

ISO 75-1 2020-02 ISO 75-2 2013-04 ASTM D 648-18 2018 ISO 178 2019-04 ASTM D 790-17 2017 ISO 179-1 2010-06 ISO 180 2019-11 ASTM D 256- 23e1 2023 ISO 306 2022-11 ISO 527-1 2019-07 ISO 527-2 2012-02 ASTM D 638-22 2022 ISO 1133-1 2022-06 ASTM D

ASTM D648 Standard test method for deflection temperature of plastics under flexural load in the edgewise position ASTM D660 Standard Test Method for Evaluating Degree of Checking of Exterior Paints ASTM D661 Standard Test Method fo

ASTM D648 (Method B); ISO 75-1, -2 Rockwell Hardness (Scale R) ASTM D785 Flexural Properties ASTM D790; ISO 178 Density and Specific Gravity ASTM D792 (Method A); ISO 1183-1 (Method A) Melt Flow Rate ASTM D1238; ISO 11

ASTM D648, ASTM D1525 Omega CL-27 “K” Gage blocks Top load scale Stopwatch Moisture Analyzer3 – Scale Temperature Probe 2 g 5 g 20 g 50 g (0 to 200) °C 1.3 mg 1.8