FindTestingLabs
Registers refreshed 2026-09-25.See refresh dates

ISO 11357 Accredited Testing Labs Worldwide

ISO 11357, all parts: Plastics - Differential scanning calorimetry (DSC). Each lab card shows which parts it holds.

Parts of this series

57 accredited laboratories in 7 countries hold ISO 11357 in their ISO/IEC 17025 scope. Primary accreditors include Deutsche Akkreditierungsstelle, Italian Accreditation Body, United Kingdom Accreditation Service. In the register, ISO 11357 scope entries most often cover Acrylonitrile-Butadiene, Aluminium, Ash Content in Plastics, Metal, Chemicals.

Total labs
57
Countries
7
Top matrix
Plastics
24 labs

Available in 7 Countries

Germany
33 labs
Italy
10 labs
United Kingdom
5 labs
Netherlands
3 labs
United States
3 labs
France
2 labs
Sweden
1 lab

Top matrices for ISO 11357

Plastics
24 labs
Metal
2 labs
Chemicals
1 lab
Solid waste
1 lab
Water
1 lab
Oil
1 lab
Glass
1 lab

Top analytes for ISO 11357

  • Acrylonitrile-Butadiene (1)
  • Aluminium (1)
  • Ash Content (1)
  • Concentration (1)
  • Copper (1)
  • Dimensions (1)
  • Dithiocarbamates (1)
  • 1-1-1-2-Tetracloroetano/1-1-1-2-Tetrachloroethane (1)

Sample labs

Filter by partAny part (57)Part 1 (28)Part 2 (37)Part 3 (49)Part 4 (4)Part 5 (5)Part 6 (25)
RESCOLL - PESSAC
PESSAC, FR
Holds: Part 1 · Part 2 · Part 3 · Part 5

ISO 11357-1 ISO 11357-2 ASTM D 3418 Composés thermoplastiques et thermodurcissables Caractéristiques thermiques : Température de fusion (tm) (°C) Enthalpie de fusion (J/g) Détermination de la température de changement d’état et de

Polytest Ingenieure
Fürth, DE
Holds: Part 1 · Part 2 · Part 3 · Part 6

ISO 11357 -1 2017 -02 Kunststoffe – Dynamische Differenz -Thermoanalyse (DSC) – Teil 1: Allgemeine Grundlagen DIN EN ISO 11357 -2 2014 -07 Kunststoffe – Dynamische Differenz kalorimetrie (DSC) – Teil 2: Bestimmung der Glasübe

APM snc Analisi Prove e Materiali
Rivarolo Canavese, IT
Holds: Part 1 · Part 2 · Part 3

ISO 11357-1:2023 + UNI EN ISO 11357-2:2020 Calorimetria Temperatura di cristallizzazione/Temperature of crystallization, Temperatura di fusione/Melting temperature (DSC) UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-3:2025 Calorimetria P

Smithers MSE
Surrey, GB
Holds: Part 1 · Part 2 · Part 3

ISO 11357-1:2023 Glass transition temperature (Tg) BS EN ISO 11357-2:2020 Temperature and Enthalpy of melting and crystallization BS EN ISO 11357-3:2018 CHEMICAL RESISTANCE Effect of liquids BS ISO 1817:2024 (Method A &

Dedalo
Arzignano, IT
Holds: Part 1 · Part 3

ISO 11357-1:2023 + UNI EN ISO 11357-3:2018 Calorimetria Legenda/Note Il simbolo (1), se presente, indica: "Materiale/Prodotto/Matrice" non previsto dal metodo ma assimilabile/The symbol (1), if present, means: Material/Product/Matrix no

3A Laboratori
Padova, IT
Holds: Part 1 · Part 2 · Part 3 · Part 6

ISO 11357-1:2023 + ISO 11357-3:2025, UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-3:2018 Esame visivo Esame visivo Calorimetria Temperatura di decomposizione/Decomposition temperature, Velocità di decomposizione/Decomposition rate ISO 11

Food Contact Center
Serravalle Pistoiese, IT
Holds: Part 1 · Part 3

ISO 11357-1:2023 + UNI EN ISO 11357-3:2025 Calorimetria Pizza/Pizza, Prodotti da forno/Bakery products Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova O&I 2-2-Bis(4-idrossifenil)propano (Bisfenolo A) (BPA)

Ianni & Partners
Borgomanero, IT
Holds: Part 1 · Part 6

ISO 11357-1:2023 + EN ISO 11357-6:2025, ISO 11357-1:2023 + ISO 11357-6:2025, UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-6:2025 _ Calorimetria Raccordi di materiale termoplastico/Thermoplastics fittings Denominazione della prova / Campi

KIMW Prüf- und Analyse
Lüdenscheid, DE
Holds: Part 1 · Part 2 · Part 3 · Part 6

ISO 11357 -1 2017-02 Kunststoffe ‒ Dynamische Differenz -Thermoanalyse (DSC) – Teil 1: Allgemeine Grundlagen DIN EN ISO 11357 -2 2020-08 Kunststoffe ‒ Dynamische Differenzkalorimetrie (DSC) ‒ Teil 2: Bestimmung der Glasübergan

Alfatestlab
Cernusco sul Naviglio, IT
Holds: Part 1 · Part 2 · Part 3

ISO 11357-1:2023 + ISO 11357-3:2025 Temperatura di transizione vetrosa/Glass transition temperature (-80°C - 500°C) ISO 11357-1:2023 + ISO 11357-2:2020 Calorimetria Calorimetria Particelle in dispersione/Dispersing particles, Particel

Materialprüfanstalt für das Bauwesen (MPA BS) Fachbereich 1 - Konstruktionen und Baustoffe Fachbereich 2 - Brandschutz
Braunschweig, DE
Holds: Part 1 · Part 3 · Part 6

ISO 11357 -1 2023-06 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles DIN EN ISO 11357 -3 2018-07 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and e

Minz Prüf + Test
Limburg an der Lahn, DE
Holds: Part 1 · Part 2 · Part 3 · Part 4 · Part 5

ISO 11357 -1 2023-02 Plastics – Differen tial Scanning Calorimetry (DSC) – Part 1: General Principles ISO 11357 -2 2020-03 Plastics – Differential Scanning Calorimetry (DSC) – Part 2: Determination of Glas Transission Temperat

MATED s.r.l.
Trento, IT
Holds: Part 1 · Part 2 · Part 3 · Part 4 · Part 6

ISO 11357-1:2023 + UNI EN ISO 11357-4:2021 Calorimetria UNI EN ISO 3451-1:2019 Gravimetria ISO 11359-2:2021 _ Contenuto di acqua/Water content UNI EN ISO 15512:2019 Met B2 Gravimetria Determinazione della temperatura di inflessione

ACL Analytisch chemisches Labor Gesellschaft mit beschränkter Haftung
Rottenburg, DE
Holds: Part 1 · Part 2 · Part 3

ISO 11357 -1 2023-06 Kunststoffe - Dynamische Differenzkalorimetrie (DSC) - Teil 1: Allgemeine Grundlagen DIN EN ISO 11357 -2 2020-08 Kunststoffe - Dynamische Differenzkalorimetrie (DSC) - Teil 2: Bestimmung der Glasübergangstem

IKT - Institut für Unterirdische Infrastruktur gGmbH Prüfstelle für Bauprodukte
Gelsenkirchen, DE
Holds: Part 1 · Part 2

ISO 11357 -1 2017-02 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (here: Section 9 ) GE DIN EN ISO 11357 -2 2014-07 Plastics - Differential scanning calorimetry (DSC) - Part 2: Deter

Ghesquiere Plastic Testing
Harper Woods, MI, US
Holds: Part 1 · Part 2 · Part 3

ISO 11357-1, ISO 11357-2, ISO 11357-3 Thermogravimetric Analysis (TGA) ASTM D3850, ASTM E1131; ISO 6964, ISO 11358-1 Thermomechanical Analysis (TMA) / Thermal Expansion ASTM D696, ASTM E831, ASTM E1545; Fiat 50560; GMW18467;

Intertek Polychemlab
GELEEN, NL
Holds: Part 1 · Part 2 · Part 3

ISO 11357-1, NEN-EN-ISO 11357-2 and NEN-EN-ISO 11357-3 GLN 37 Plastics Determination of gloss value at 20 degrees, 60 degrees and 85 degrees; optical method 3949 in-house method (execution of analysis NEN-EN-ISO 2813 GLN 38 Pla

MD ELEKTRONIK GmbH MD Test Laboratory (Prüflabor)
Waldkraiburg, DE
Holds: Part 1 · Part 2 · Part 3

ISO 11357 -1 2017-02 Kunststoffe – Dynamische Differenz -Thermoanalyse (DSC) – Teil 1: Allgemeine Grundlagen DE DIN EN ISO 11357 -2 2020-08 Kunststoffe – Dynamische Differenz -kalorimetrie (DSC) – Teil 2: Bestimmung der Gla

Kiwa CERMET Italia S.p.A. con socio unico
Cadriano di Granarolo Emilia, IT
Holds: Part 1 · Part 3 · Part 6

ISO 11357-1:2023 + UNI EN ISO 11357-6:2018 Calorimetria Materie plastiche/Plastics - solo/only Materie plastiche UNI EN 12201, UNI EN 1555, ISO 4427, ISO 4437 Denominazione della prova / Campi di prova Metodo di prova Tecnica di prova

SGS INSTITUT FRESENIUS
Taunusstein, DE
Holds: Part 1 · Part 2 · Part 3 · Part 6

ISO 11357 -1 2017 -02 Kunststoffe – Dynamische Differenz -Thermoanalyse (DSC) – Teil 1: Allgemeine Grundlagen ATH DIN EN ISO 11357 -2 2014 -07 Kunststoffe – Dynamische Differenz -Thermoanalyse (DSC) – Teil 2: Bestimmung der G

Envalior Engineer Materials (WUXI) Co., Ltd. Research and Development Testing Center (RDTC)
China, DE
Holds: Part 1 · Part 3

ISO 11357-1 Plastics — Differential scanning calorimetry (DSC) — Part 1: General 2023-02 principles ISO 11357-3 Plastics — Differential scanning calorimetry (DSC) — Part 3: 2018-03 Determination of temperature and enthalpy of melting and cr

GWP Gesellschaft für Werkstoffprüfung mbH
Zorneding-Pöring, DE
Holds: Part 1 · Part 2 · Part 3 · Part 5

ISO 11357 -1 2023-06 Kunststoffe – Dynamische Differenzkalorimetrie (DSC) – Teil 1: Allgemeine Grundlagen ZO DIN EN ISO 11357 -2 2020-08 Kunststoffe – Dynamische Differenzkalorimetrie (DSC) – Teil 2: Bestimmung der Glas

GP Kunststofflabor
Hettstadt, DE
Holds: Part 1 · Part 2 · Part 3 · Part 6

ISO 11357 -1 2017 -02 Kunststoffe – Dynamische Differenz -Thermoanalyse (DSC) – Teil 1: Allgemeine Grundlagen DIN EN ISO 11357 -2 2020-08 Kunststoffe – Dynamische Differenzkalorimetrie (DSC) – Teil 2: Bestimmung der Glasübe

IMA Materialforschung und Anwendungstechnik
Dresden, DE
Holds: Part 1 · Part 2 · Part 3 · Part 5 · Part 6

ISO 11357 -1 2017 -02 Plastics – Differential scanning calorimetry (DSC) – Part 1: General principles DIN EN ISO 11357 -2 2020 -08 Plastics – Differential scanning calorimetry (DSC) – Part 2: Determination of glass transition te

Kiwa Nederland
RIJSWIJK ZH, NL
Holds: Part 1 · Part 3 · Part 6

ISO 11357-3 ISO 11357-6 AP 6. ISO 11357-1 ISO 11357-3 ISO 11357-6 BO 7. Polymer materials and products Calculation methods A-C09 NEN-EN-ISO 9080 ISO 2578 AP 8. Polymer materials and products Concentration measurements A-C10

Ostthüringische Materialprüfgesellschaft für Textil und Kunststoffe mbH Rudolstadt (OMPG)
Rudolstadt, DE
Holds: Part 1 · Part 2 · Part 3 · Part 6

ISO 11357 -1 2023-06 Kunststoffe - Dynamische Differenz -Thermoanalyse (DSC) – Teil 1: Allgemeine Grundlagen DIN EN ISO 11357 -2 2020-08 Kunststoffe - Dynamische Differenz -Thermoanalyse (DSC) – Teil 2: Bestimmung der Glasübergang

IIP Srl - LABORATORIO PROVE
Monza, IT
Holds: Part 1 · Part 2 · Part 3 · Part 6

ISO 11357-1:2023 + ISO 11357-2:2020, UNI EN ISO 11357-1:2023 + UNI EN ISO 11357-2:2020 Calorimetria ISO 527-1:2019 + ISO 527-3:2018, UNI EN ISO 527-1:2019 + UNI EN ISO 527-3:2019 ISO 527-1:2019 + ISO 527-2:2012, UNI EN ISO 527-1:2019 + U

LABORATORIO ITALIANO GOMMA - CERISIE
Monza, IT
Holds: Part 1 · Part 3

ISO 11357-1:2023 + ISO 11357-3:2018 Calorimetria Legenda/Note Il simbolo (1), se presente, indica: "Materiale/Prodotto/Matrice" non previsto dal metodo ma assimilabile/The symbol (1), if present, means: Material/Product/Matrix not provi