ISO 11452-4 Accredited Testing Labs Worldwide

ISO 11452-4 (excluding TWC method); ISO 13766-1; ISO 13766-2; UNECE Regulation 10, Revision 6, Electronic Sub-assemblies (ESA), Section 6.8, 7.18 (excluding Stripline method) Direct RF Power Injection ISO 11452-7 Immunity to

Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMV ISO 11452 -2 (2004 -11) Road vehicles — Component test methods for electrical disturbances from narrowband

ISO 11452-4:2020-04 Edition 5 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods Keine Prüfungen mit Rohrkoppler nach den Abschni

ISO 11452-4: 2020 1 - 400 MHz Fordonskomponenter Nej Only BCI ISO 11452-8: 2015 DC-150 kHz Fordonskomponenter Nej ISO 11452-9: 2021 360-2700 MHz Fordonskomponenter Nej ISO 7637-2: 2011 Range 12VDC - 24VDC, Level I - IV Fordonskomponenter Ne

ISO 11452-4:2020 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods EMV / EMC ISO 11452-5:2002 Road vehicles − Component test m

ISO 11452-4:2011-12 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods bis 400 MHz EMC ISO 7637-2:2011 Road vehicles - Electrical dist

ISO 11452-4:2011 (excludes TWC) A A 10.3.4 Vehicular Transient ISO 7637-1:1990 A, C Testing ISO 7637-2:1990 12 and 24 V ISO 7637-2:2004, pulses 1, 2a, 2b, Emissions and 3a, 3b and 4 only ISO 16750-2:2012 Section 4

Test Description: Tests Method(s) 1: Conducted Susceptibility, Radio Frequency2 Radiated Susceptibility, Audio Frequency2 MIL-STD-461, Method CS114; RTCA/DO-160, Section 20; AIRBUS ABD0100.1.2, Section 3.3.2; BOEING D6-

IMQ SpA Via Cuneo, 12 10028 Trofarello TO Allegato al certificato di accreditamento n. 00728 rev. 10 del 21/05/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 26 Sede A Data: 27/05/2025 pag. 4 di 7 Prove di emissioni/Emissions te

ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pin e Tre e s, Ch e rts ey La n e , Sta ine s -u po n-Tha me s , TW18 3 HR, UK 3C Test Ltd Issue No: 068 Issue date: 22 Aug

ISO 11452-4 (2005); ISO 11452-4 Stripline Immunity ISO 11452-5 (2002); ISO 11452-5 Immunity to Magnetic Fields ISO 11452-8 (2015); ISO 11452-8 Portable Transmitter RF Immunity ISO 11452-9 (2012); ISO 11452-9 Automotive Transient

ISO 11452-4 (2020); CS.00244 (2023), Section 5.3.2; GMW 3097 (2022), Section 3.4.1; FMC1278 (2023), RI112; TL81000 (2021), Section 5.2.2; ECE R10.06 Absorber-lined Shielded Enclosure (ALSE) With and Without Ground Plane ISO 11

ISO 11452-4:2020 Straßenfahrzeuge – Komponentenprüfverfahren für gestrahlte Störungen durch schmalbandige gestrahlte Komponentenprüfverfahren für elektrische Störungen durch schmalbandige gestrahlte elektromagnetische Energie – Teil

Test Technology: Test Method(s) / Standard(s)1: Conducted Transient Immunity ISO 7637-2; ISO 7637-3; ES-XW7T-1A278-AC (CI 210, CI 220, CI 230, CI 250, CI 260, CI 270, RI 130, RI 150); EMC-CS-2009.1 (CI 210, CI 220,

Test: Test Methods1: RF Conducted Emissions (cont.) MES PW 67602E; Hyundai/Kia ES 96200-00 rev k; B21 7112-OR; BT-LAH-HV Modul-EMV-V4.6; SMTC 3 800 006; Q/FC-CC06-001A; Q/JLY J7110779E; QBAIC C220026; GWTAD05-02; VDR-NOTE_SPE

ISO 11452-4:2020 Straßenfahrzeuge - Komponentenprüfungen, Methoden für die Bestimmung elektrischer Störungen durch kurzwellige elektromagnetische Energieabstrahlungen - Teil 4: Methode zur Anregung des Kabelbaumes kein Rohrkoppler EM

ISO 11452-4; ECE Regulation 10 Annex 9; ISO 14982; EN 15194; ISO 13766-1; EN ISO 13766-1; ISO 13766-2; EN ISO 13766-2; GB/T 17619 Absorber-Lined Shielded Enclosure (ALSE) ISO 11452-2; ECE Regulation 10 Annex 9; ISO

ISO 11452-4 A. EMC. I.03 Electric and electronic equipment Harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity 16.5 Hz – 3000 Hz EN/IEC 61000-4-13, EN/IEC 61000-2-2 A. EMC. I

Parameter/Equipment Range CMC2, 4, 8 (±) Comments Impedance (Reflection Coefficient)3 – Measure Magnitude (0 to 1) Phase Θ (0 to 180) ° Magnitude (0 to 1) Phase Θ (0 to 180) ° (9 to 1

ISO 11452-4; ISO 11452-4 (2011); SAE J1113-4 Stripline ISO 11452-5; ISO 11452-5 (2002); SAE J1113-23 Direct Radio Frequency (RF) Power Injection ISO 11452-7; SAE J1113-3 Magnetic Fields Immunity ISO 11452-8; S

ISO 11452-4; ISO 11452-4:(2005, 2011) RF Conducted Emissions (Non-Vehicle, Voltage and Current Methods, HV excluded) CISPR 25; CISPR 25:2016 Radiated Emissions (Non-Vehicle) CISPR 25; CISPR 25:2016 Radiated Immunity - Ab

ISO 11452-4:2005 2.5 Transient Immunity UNECE Reg 10.5 Conducted immunity on supply lines ISO 7637-2:2004 + A1:2008 2.6 Radiated Immunity ISO 11452-2:2004 Absorption Chamber Substitution meth

ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pin e Tre e s, Ch e rts ey La n e , Sta ine s -u po n-Tha me s , TW18 3 HR, UK ZF Automotive UK Limited Issue No: 084 Issue da

Test Technology: Test Method(s): Electrostatic Discharge (ESD) ISO 10605; ISO 10605 (2001; 2008); SAE J1113-13; SAE J1113-13 (2015) HV-LV Coupling Test CISPR 25; CISPR 25 (2008; 2016) Immunity to Magnetic Fields ISO 11452-8; ISO

ISO 11452-4:2020-04 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods EMV ISO 11452-8:2015-06 Straßenfahrzeuge - Komponentenprüfverf

ISO 11452-4; GB/ T 33014.4; ISO 11452-8; GB/ T 33014.8; ISO 11452-9; GB/ T 33014.9; ISO 7637-2; GB/T 21437.2; ISO 7637-3; GB/T 21437.3; ISO 10605; GB/T 19951; UN ECE R10; SAE J1113-1; SAE J1113-4

ISO 11452-4; GB/T 33014.4; GB/T 33014.9; ISO 11452-9 Transients Immunity Testing ISO 7637-2; GB/T 21437.2; GB/T 21437.2-2008; ISO 7637-3; GB/T 21437.3; ISO 16750-2 Magnetic Field Immunity Testing GB/T 33014.8; ISO 11452-8

Bereich Norm / Hausverfahren /Version Titel der Norm oder des Hausverfahrens (ggf. Abweichungen / Modifizierungen von Normverfahren angeben) Prüfbereich / Einschränkung EMV ISO 11452-9:2021 Road vehicles - Component test methods f

Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMV ISO 11452 -2:2004 Road vehicles - Component test methods for electrical disturbances from narrowband radiat

Fachbereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Einschränkungen zum Prüfverfahren transient conduction along shielded high voltage supply lines only EMV ISO 10605: 2023 -06 Road vehicl

Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Ein - schränkungen zum Prüfbereich EMV ISO 11452 -9:2012 Road vehicles – Component test methods for electrical disturbances from narrowband rad

Test Description: Test Method 1: Flicker and Fluctuations IEC 61000-3-3; EN 61000-3-3; IEC 61000-3-11; EN 61000-3-11; SANS 61000-3-3 Electrostatic Discharge IEC 61000-4-2; EN 61000-4-2; SANS 61000-4-2 Radiated Immunity IEC 61000-4-3;

This document is a translation. The definitive version is the original German annex to the accreditation certificate. Technical field Standard / In-house procedure / Version Title of standard or in house procedure (deviations / mod

2 Elektromagnetische Verträglichkeit (EMV) [Keine flexible Akkreditierung] Bereich Norm oder Hausverfahren / Ausgabestand Titel der Norm oder des Hausverfahrens Prüfbereich / Einschränkungen EMV DIN EN 62920: 2018-07 Photovoltaisc

ISO 11452-4:2005/Cor.1:2009, ISO 11452-4:2011, ISO 11452-4:2020 Prove di immunità ai campi elettromagnetici irradiati/Radiated electromagnetic field immunity test (Fino a 1GHz 50V/m; Da 1GHz a 2GHz 30V/m) ISO 11452-2:2004, ISO 11452-2:20

ISO 11452-4:2020 Straßenfahrzeuge - Komponentenprüfungen, Methoden für die Bestimmung elektrischer Störungen durch kurzwellige elektromagnetische Energieabstrahlungen - Teil 4: Methode zur Anregung des Kabelbaumes Ohne Prüfung mit TW

ISO 11452-4; SAE J1113-21 Automotive Transients Immunity Testing ISO 7637-2; ISO 7637-3 (CCC only); ISO 16750-2 (Load Dump) Electrostatic Discharge Testing ISO 10605 Continuous Power Line Disturbances Immunity ISO 11452-1

ISO 11452-4; CS.00054, Section 5.8.1; CS.00244 Section 5.3.2; GMW 3097, Section 3.4.1; SAE J1113-4; EMC-CS-2009.1 (RI112); FMC1278 (RI112); ECE Regulation 10.06 Annex 9 Radiated Immunity Anechoic (Up to 6GHz and 200V/m) (Including

ISO 11452-4; SAE J1113-4; GB/T 33014.4 Absorber Lined Shielded Enclosure (ALSE) RF Immunity 80MHz - 200MHz, 100V/m 200MHz - 6GHz, 200V/m GB/T 33014.2; ISO 11452-2

ISO 11452-4; SAE J1113-4; UN ECE Regulation 10; ISO 14982; ISO 14982-1; ISO 14982-2; ISO 13766-1; EN ISO 13766-1; BS EN ISO 13766-1; AS ISO 13766.1; ISO 13766-2; EN ISO 13766-2; BS EN ISO 13766-2; AS ISO 13766.2 Magnetic Field Immun

Test Technology Test Method(s) 1,2 Issue Chapter Absorber-Lined Shielded ISO 11452-2 2004 Enclosure (ALSE) ISO 11452-2 2019 (up to 18 GHz, including Radar Pulse) ISO 11452-2 BMW GS95002-2 2013 5.3 BMW GS95002-2 2019 5.3 BMW

ISO 11452-4; SAE J1113-4; ES 96200-00; RNDS-C-00517 RF Conducted Emissions CISPR 25; SAE J1113-41; ES 96200-00; RNDS-C-00517 RF Radiated Emissions CISPR 25; SAE J1113-41; ES 96200-00; RNDS-C-00517 Magnetic Field Emis

Test(s): Test Method(s) 1,2: Absorber-Lined Shielded Enclosure (ALSE) 80 MHz to 200MHz, Vertical, 100 V/m @ 1m 200 MHz to 4GHz, Vertical, 200 V/m @ 1m 300 MHz to 4 GHz, Horizontal, 200 V/m @ 1m

ISO 11452-4:2011 (sections 4, 5, 6.1, 7, 8); GB/T 17619-1998 (sections 4, 5, 7, 8, 9.1, 9.5); ISO 11452-4:2020 (sections 4, 5, 6.1, 7, 8); GB/T 33014.4-2016 (All chapters); ECE R10 Rev. 5 (sections 6.8.2.1, 6.9); ECE R10 Rev. 6 (secti

ISO 11452-4; ISO 11452-4 (2011, 2020) (excluding TWC Method) Absorber-Lined Shielded Enclosure (ALSE) (up to 6 GHz and 200 V/m) ISO 11452-2; ISO 11452-2 (2004, 2019) Absorber-Lined Shielded Enclosure (ALSE) Radar Pulse only

Assessment Manager: RW5 Page 1 of 2 Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 29498 Accredited to ISO/IEC 17025:2017 Skyships

Test: Test Method(s) 1: Portable Transmitters ISO 11452-9 Electrostatic Discharge ISO 10605 (excluding Clause 10); SAE J1113-13 Conducted Transient Immunity along Supply Lines Only ISO 7637-2; SAE J1113-11 Coupled Transien

ISO 11452-4 (excluding TWC method); ISO 13766 (section 5.8); E/ECE/324/Add. 9 R10 (section 6.8); EN 13309 (section 4.7); SAE J1113-4; GB/T 17619; GB/T 33014.4; GB 34660 (section 4.7); GB/T 22630 (section 6.4.1); GB 26149 (section 5.1

ISO 11452-4:2011 Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods EMC ISO 11452-4:2005 Road vehicles - Component test methods for

ISO 11452-4 2020-04 Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 4: Harness excitation methods Without HV, Without TWC EMC ISO 16750-2 2012-11 Road vehic