ISO 11452-4 Accredited Testing Labs in United States

Parameter/Equipment Range CMC2, 3 (±) Comments Electrical Loads Road Vehicles, Potential Environmental Stress Voltages Front Time, Duration Time, Fall Time (1 to 200) V 0.1 ms to 10 s 2.3 %

ISO 11452-4; ISO 11452-4 (2020) Road Vehicles – Component Test: Methods for electrical disturbances from narrowband radiated electromagnetic energy Stripline (10 kHz - 400 MHz) ISO 11452-5; ISO 11452-5 (2002) Road Vehicles – Component

ISO 11452-4 Power Line Magnetic Field IEC 61000-4-8; EN 61000-4-8; KS C 9610-4-8; AS/NZS 61000.4.8; SANS 61000-4-8 Voltage Dips and Fluctuations IEC 61000-4-11; EN 61000-4-11; KS C 9610-4-11; AS/NZS 61000.4.11 Pulse Magnetic Fiel

ISO 11452-4 (excluding TWC test method); GB/T 33014.4; SAE J1113-4 Immunity to Magnetic Fields ISO 11452-8; SAE J1113-22 Portable Transmitters ISO 11452-9 Electrical Loads ISO 16750-2; GB/T 28046.2

ISO 11452-4 Conducted Transient Disturbances, Power Lines ISO 7637-2 Conducted Transient Disturbances, Other than Supply Lines ISO 7637-3 Electrical Loads ISO 16750-2 Emissions Harmonics and Flicker EN 61000-3-2; IEC 6

ISO 11452-4; SAE J1113-4 Absorber-Lined Shielded Enclosure (ALSE) ISO 11452-2 (up to 300 V/m for radar band) Transverse Electromagnetic (TEM) Cell SAE J1113-24 (up to 200 MHz) Electrical Transient Conduction on Supply Line

ISO 11452-4 (2005); ISO 11452-4 (2011, 2020) (excluding TWC Method); SAE J113-4; IEC 61000-4-6; EN 61000-4-6; ECE Regulation 10.06, Annex 9, Section 4.3 Radiated Immunity – Absorber-Lined Shielded Enclosure (ALSE) (200 MHz to 3.2 GH

ISO 11452-4 (2005); ISO 11452-4 (2011, 2020) (excluding TWC Method); ECE Regulation 10.05 Annex 9 Section 4.3; ECE Regulation 10.06 Annex 9 Section 4.3 Absorber-Lined Shielded Enclosure (ALSE) (up to 6 GHz and 200 V/m with curre

ISO 11452-4 (excluding TWC method); ISO 13766-1; ISO 13766-2; UNECE Regulation 10, Revision 6, Electronic Sub-assemblies (ESA), Section 6.8, 7.18 (excluding Stripline method) Direct RF Power Injection ISO 11452-7 Immunity to

ISO 11452-4; SAE J1113-4; ISO 11451-2 11452-8:2015 ISO 7637-2:2011 RTCA/DO-160, Section 22 1 When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use the version that imm

ISO 11452-4; SAE J1113-21 Automotive Transients Immunity Testing ISO 7637-2; ISO 7637-3 (CCC only); ISO 16750-2 (Load Dump) Electrostatic Discharge Testing ISO 10605 Continuous Power Line Disturbances Immunity ISO 11452-1

ISO 11452-4; CS.00054, Section 5.8.1; CS.00244 Section 5.3.2; GMW 3097, Section 3.4.1; SAE J1113-4; EMC-CS-2009.1 (RI112); FMC1278 (RI112); ECE Regulation 10.06 Annex 9 Radiated Immunity Anechoic (Up to 6GHz and 200V/m) (Including

ISO 11452-4; SAE J1113-4; UN ECE Regulation 10; ISO 14982; ISO 14982-1; ISO 14982-2; ISO 13766-1; EN ISO 13766-1; BS EN ISO 13766-1; AS ISO 13766.1; ISO 13766-2; EN ISO 13766-2; BS EN ISO 13766-2; AS ISO 13766.2 Magnetic Field Immun

ISO 11452-4; ISO 11452-4 (2011, 2020) (excluding TWC Method) Absorber-Lined Shielded Enclosure (ALSE) (up to 6 GHz and 200 V/m) ISO 11452-2; ISO 11452-2 (2004, 2019) Absorber-Lined Shielded Enclosure (ALSE) Radar Pulse only

ISO 11452-4:2011 Voltage Dips, Short Interruptions and Voltage Variations IEC 61000-4-11:2020; RTCA/DO-160E:2004 (Section 16); RTCA/DO-160F:2007 (Section 16); RTCA/DO-160G:2010 (Section 16) Electrical Fast Transient Immunity IEC

ISO 11452-4 (2020); ISO 11452-7 (2003); ISO 11452-8 (2015); ISO 11452-10 (2009); Ford ES-XW7T-1A278-AC; FMC 1278 (2016); GMW 3097; DC-10614 Military / Avionic MIL-STD 461G RE102; RTCA/DO-160G Section 20 (Equipment Categories S and T

ISO 11452-4 (2005); ISO 11452-4 (2011, 2020) (excluding TWC Method); SAE J113-4 Bulk Current Injection (BCI) ISO 11452-4 (excluding TWC test method); ISO 11452-4:2020 (excluding TWC test method); SAE J1113-21 Automotive Product

ISO 11452-4 (2005, Cor1:2009, 2011, 2020) – excluding tubular wave coupler method ISO 11452-9 (2012, 2021) ISO 11452-8 (2007, 2015) – excluding Helmholtz Coil method ISO 11452-2 (2004, 2019) IEC 61000-4-21 (2003, 2011); ISO 11452-11

ISO 11452-4 Electrostatic Discharge (ESD) SAE J1113-13; ISO 10605 Radiated RF Immunity SAE J1113-21; ISO 11452-2 (up to 6 GHz) Electrical Transients SAE J1113-11; ISO 7637-2; ISO 16750-2 (Sections 4.4, 4.6.3 & 4.6.4) Harle