ETSI EN 301 489-3 Accredited Testing Labs Worldwide
113 accredited laboratories in 11 countries hold ETSI EN 301 489-3 in their ISO/IEC 17025 scope. Primary accreditors include American Association for Laboratory Accreditation, Deutsche Akkreditierungsstelle, United Kingdom Accreditation Service. In the register, ETSI EN 301 489-3 scope entries most often cover Specific Absorption Rate, Electromagnetic Radiation, Power Frequency Magnetic Fields in Other.
Available in 11 Countries
Top matrices for ETSI EN 301 489-3
Top analytes for ETSI EN 301 489-3
- Specific Absorption Rate (2)
- Electromagnetic Radiation (1)
- Power Frequency Magnetic Fields (1)
- Radiated Emissions (1)
- Rf Voltages (1)
Sample labs
Test Technology: Test Method(s) 1: Immunity to changes in power frequency EN 61000-4-28; IEC 61000-4-28; GB/T 17626.28; BS EN 61000-4-28 Voltage dips, short interruptions and voltage variations immunity tests for equipment with
ETSI EN 301 489-3; ETSI EN 301 489-9; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-33; ETSI EN 301 489-51; ETSI EN 301 489-52; ETSI EN 301 511; ETSI EN 301 893; ETSI EN 301 908-1; ETSI EN 302 065-1; ETSI EN 302 065-2;
ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pin e Tre e s, Ch e rts ey La n e , Sta ine s -u po n-Tha me s , TW18 3 HR, UK TUV SUD Limited (Trading as TÜV SÜD) Issue No:
ETSI EN 301 489-3 V2.1.1: 2019-03 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD)
ETSI EN 301 489-3 V2.3.2 (2023) Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised St
ETSI EN 301 489-3 V2.3.2 2023 _ Apparecchiature e servizi radio: sistemi di trasmissione dati a banda larga/Radio equipment and services: broadband Data Transmission Systems Denominazione della prova / Campi di prova Metodo di prova Te
ETSI EN 301 489-3 V2.1.1 (2019-03) Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised
Testing Activities Performed in Support of FCC Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1 Rule Subpart/Technology Test Method Maximum Frequency (MHz) Unintentional Rad
Test Technology: Test Method(s)1: Conducted Immunity IEC 61000-4-6; EN 61000-4-6 Power Frequency Magnetic Field IEC 61000-4-8; EN 61000-4-8 Voltage Dips, Interruptions, and Line Voltage Variat
Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Einschränkungen zum Prüfverfahren EMV DIN EN 61326 -3-1: 2018-04 (EN 61326-3-1) Elektrische Mess -, Steuer -, Regel- und Laborgeräte - EMV-A
Fach- bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfverfahren / Einschränkungen EMV Namur NE 21: 2017-07-01 Elektromagnetische Verträglichkeit von Betriebsmitteln der Prozess- und Labo
Test: Test Methods1: EU Radio Standards (continued) EN 302 208; EN 302 574-3; EN 303 345-1; EN 303 345-3; EN 303 413; EN 303 417; ETSI EN 303 687 Sound System Equipment BS EN/EN 50332-1; BS EN/EN 50332-2 EU EMC Standards E
ETSI EN 301 489-3 V2.3.2 (2023-01) Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short- Range Devices (
Test Technology: Test Method(s) 2: Common Technical Standards for Machines and Mechanisms S2-W-5 1 Guide to Documentation for Semiconductor Equipment Installation SEMI E6 1 Railway Immunity IEC 62236-3-21/ EN 50121-3-21 Gen
ETSI EN 301 489-3 V2.3.2 2023 _ Apparecchiature e servizi radio: sistemi di trasmissione dati a banda larga/Radio equipment and services: broadband Data Transmission Systems Denominazione della prova / Campi di prova Prove di immunità/I
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 EST TECHNOLOGY CO., LTD. Chilingxiang, Qishantou, Santun, Houjie Dongguan, Guangdong, People’s Republic of China Mr. Iceman Hu Phone: +86 0769-83081888 x808 ELECTRICAL Valid To:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 TUV RHEINLAND (GUANGDONG) LTD. 1/F & 2/F, Building 2, No.767 Tianyuan Road, Tianhe District Guangzhou 510650, Guangdong, People’s Republic of China Mrs. Tina Jiang Phone: +86 20 2839
T313, Eleforss Oy Liite 1, Akkreditoitu pätevyysalue Päätöksen numero: T313/M10/2026 Akkreditoinnin vaatimusstandardi: SFS-EN ISO/IEC 17025:2017 Akkreditointialue: Testauslaboratoriot Päätöspvm: 22.4.2026 Päätöksen viimeinen voimassa
ETSI EN 301 489-3 V2.1.1 ETSI EN 301 489-3 V2.3.2 Electromagnetic Compatibility (EMC) standard for radio equipment and services - Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246
ISO/IEC 17025:2017 Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pin e Tre e s, Ch e rts ey La n e , Sta ine s -u po n-Tha me s , TW18 3 HR, UK UL International (UK) Ltd Issue No: 070 Issue
Bereich Norm / Hausverfahren / Version Titel der Norm oder des Hausverfahrens Prüfbereich / Einschränkung EMV ETSI EN 301 489 -3 V2.3.2 (2023-01) ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
ETSI EN 301 489-3; ETSI EN 301 489-17; ETSI EN 301 489-5; ETSI EN 301 489-6; ETSI EN 301 489-19; ETSI EN 301 489-20; ETSI EN 301 489-52; KS X 3124; KS X 3126; KS X 3127; KS X 3128; KS X 3139; KS X 3129; EAC Voluntary Voting System Gu
Test Technology: Test Method(s) 1: Generic and Product Family Standards IEC 61000-6-1; IEC 61000-6-2; IEC 61000-6-3; IEC 61000-6-4; IEC 61547; IEC 61326-1; IEC 61326-2-6; IEC 60601-1-2 (excluding Proximity magnetic fields); EN 61
ETSI EN 301 489-3; ETSI EN 301 489-17; ETSI EN 301 489-19 RF-Radio European Union (EU) ETSI EN 300 328; ETSI EN 301 893; ETSI EN 303 687; ETSI EN 302 502; ETSI EN 300 220-1; ETSI EN 300 330; ETSI EN 300 440; ETSI EN 303 413;
ETSI EN 301 489-3 V2.1.1 2019-03 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements standard for radio
ETSI EN 301 489-3; ETSI EN 301 489-9; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-33; ETSI EN 301 489-34; ETSI EN 301 489-52; ETSI EN 301 839 (Excluding Clause B.1.1.3); ETSI EN 301 893; ETSI EN 302 065-1; ETSI EN 302 065
ETSI EN 301 489-3; ETSI EN 301 489-17; AS/NZS 4268 RF Exposure (MPE) EN 62479; EN 50663; EN 50665; EN IEC 62311 Luminaire IEC 60598-1; EN IEC 60598-1; BS EN IEC 60598-1; AS/NZS 60598-1; IEC 60598-2-1; EN IEC 60598-2-1; BS EN IEC 6
ETSI EN 301 489-3; ETSI EN 301 489-9; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-52 Medical Electrical Equipment BS EN 60601-1-2; EN 60601-1-2; IEC 60601-1-2; ANSI/AAMI/IEC 60601-1-2
ETSI EN 301 489-3 V2.1.1 2017-03 ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised S
ETSI EN 301 489-3 V2.1.1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operat
ETSI EN 301 489-3; KS X 3125; ETSI EN 301 489-5; KS X 3127; ETSI EN 301 489-17; KS X 3126; ETSI EN 301 489-19; ETSI EN 303 413 Telecom CFR 47 Part 68 (using T1.TRQ.5:1999, TSB-31D) ANSI/TIA-968-A; ANSI/TIA-968-A-1; ANSI/TIA-96
EMV DIN EN IEC 61326 -3-2: 2019-10 VDE 0843-20-3-2:2019-10 (EN IEC 61326-3-2:2018) Elektrische Mess -, Steuer -, Regel- und Laborgeräte - EMV-Anforderungen - Teil 3-2: Störfestigkeitsanforderungen für sicherheitsbezogene System
ETSI EN 301 489-3; ETSI EN 301 489-7; ETSI EN 301 489-17; ETSI EN 301 489-34; ETSI EN 300 386 RF Exposure (MPE calculation only) AUSTRALIAN COMMUNICATIONS AND MEDIA AUTHORITY Radiocommunications (Electromagnetic Radiation — Human
ELECTRICITE / Tout équipement ou produit électrique et/ou électronique soumis à des essais de compatibilité électromagnétique en émission (27-1) Nature d’essai Objet soumis à essai Caractéristique mesurée ou recherchée Principe de la m
ETSI EN 301 489-3; ETSI EN 301 489-5; ETSI EN 301 489-9; ETSI EN 301 489-17; ETSI EN 301 489-19
ETSI EN 301 489-3; ETSI EN 301 489-5; ETSI EN 301 489-9; ETSI EN 301 489-13; ETSI EN 301 489-15; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-33; ETSI EN 301 489-52 ETSI EN 301 843-1; ETSI EN 301 843-2; ETSI EN 301 8
Fachbereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Einschränkungen zum Prüfverfahren / Standort EMV DIN EN 301489 -3: 2019 Elektromagnetische Verträglichkeit und Funkspektrumangelegenheit
T298/M23/2025 Liite 1 / Appendix 1 Sivu / Page 4(23) Vaatimus/Requirement SFS-EN ISO/IEC 17025:2017 17.12.2025 Päätöksen päiväys / Date of decision 22.07.2028 Päätöksen viimeinen voimassaolopäivä / Date of expiry www.finas.fi Voimass
ETSI EN 301 489-3 V2.3.2:2023-01 Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz; Harmonised S
ETSI EN 301 489-3: v2.1.1 (2019) v2.3.2 (2023) Electro Magnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short- Range Devices (SRD) operating on frequencies between 9 kHz and
Test Technology: Test Method(s)1: Radiated Immunity (up to 6 GHz, 10 V/m) IEC 61000-4-3; EN 61000-4-3; EN IEC 61000-4-3; AS/NZS 61000-4-3; BS EN IEC 61000-4-3 Electrical Fast Transient (EFT) IEC 61000-4-4; EN 61000-4-4; AS/NZS 610
Test Technology: Test Method(s)1: Voltage Dips and Interrupts IEC 61000-4-11;EN 61000-4-11; BS EN 61000-4-11; AS/NZS 61000.4.11 Product Family and Industry Specific Standards CISPR 35; EN 55035; BS EN 55035; AS/NZS CISPR 35;
Bereich Norm / Hausverfahren / Version Titel der Norm oder des Hausverfahrens Prüfbereich / Einschränkung EMV DIN EN 61326 -2-5 ; VDE 0843-20-2-5 2022-11 Elektrische Mess -, Steuer -, Regel - und Laborgeräte - EMV-Anforderungen
ETSI EN 301 489-3; ETSI EN 301 489-7; KS C 3129; ETSI EN 301 489-52; ETSI EN 301 489-17; ETSI EN 301 489-23; ETSI EN 301 489-24; ETSI EN 301 489-25; ETSI EN 301 489-26; ETSI EN 301 489-28; ETSI EN 301 489-29; ETSI EN 301 489-31; ETSI
ETSI EN 301 489-3; ETSI EN 301 489-17 EMF (Electromagnetic Fields) IEC 62233; EN 62233 Charging Equipment for Electric Vehicles Test Electric vehicle conductive charging system –Part 1: General requirements EN IEC 61851-1; IEC
ETSI EN 301 489-3; ETSI EN 301 489-5; ETSI EN 301 489-6; ETSI EN 301 489-9; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-33; ETSI EN 301 489-34; ETSI EN 301 489-50; ETSI EN 301 489-52; ETSI TS 138 114 On the following
ETSI EN 301 489-3; ETSI EN 301 489-5; ETSI EN 301 489-9; ETSI EN 301 489-17; ETSI EN 301 489-19; ETSI EN 301 489-52 Harmonics and Flicker EN IEC 61000-3-2; IEC 61000-3-2; EN 61000-3-3; IEC 61000-3-3 Immunity Electrostatic D
ETSI EN 301 489-3:2023- 01 Elektromagnetische Verträglichkeit für Funkeinrichtungen und -dienste - Teil 3: Spezifische Bedingungen für Funkgeräte geringer Reichweite (SRD) für den Einsatz auf Frequenzen zwischen 9 kHz und 246 GHz - H
Fach- bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMV DIN EN 61000 -3-3 2023-02 Elektromagnetische Verträglichkeit (EMV) - Teil 3-3: Grenzwerte - Begren
Bereich Norm oder Prüfverfahren / Ausgabestand Titel der Norm oder des Prüfverfahrens Prüfbereich / Einschränkungen EMF IEEE Std 1528™ -2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorpti
Showing labs 1–50 of 113. Use pagination below to see more.