ISO 75-2 Accredited Testing Labs Worldwide
13 accredited laboratories in 5 countries hold ISO 75-2 in their ISO/IEC 17025 scope. Primary accreditors include Deutsche Akkreditierungsstelle. In the register, ISO 75-2 scope entries most often cover Ball Indentation Hardness, Density, Durezza Vickers in Plastics.
Available in 5 Countries
Top matrices for ISO 75-2
Top analytes for ISO 75-2
- Ball Indentation Hardness (1)
- Density (1)
- Durezza Vickers (1)
- Heat Resistance Temperature (1)
- Melt Mass-Flow Rate (1)
Sample labs
1 Rheologische Prüfungen [Flex A] ASTM D1238 2013 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Pastometer ISO 1133 -1 2011-12 Kunststoffe ‒ Bestimmung der Schmelze-Massefließrate (MFR) und der Schme
ISO 75-2; ISO 75-3; ASTM D648; Vicat Softening Temperature(VST) GB/T 1633; ASTM D1525 Melt Mass Flow Rate and Melt Volume Flow Rate GB/T 3682.1; ISO 1133-1; ASTM D1238 Insulation resistivity GB/T 1692 Xenon-Arc Sources Te
Prüfungen in den Bereichen: ausgewählte mechanisch-technologische, thermische und physikalische Untersuchungen an Kunststoffformmassen, -halbzeugen und -bauteilen Dem Prüflaboratorium ist, ohne dass es einer vorherigen Information
ASTM D5813 2004 Standard Specification for Cured -In -Place Thermosetting Resin Sewer Piping Systems ASTM D790 2017 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulatin
ASTM D 2240 2015 Härteprüfung an Gummi DIN EN ISO 2039 -1 2003-06 Kunststoffe ‒ Bestimmung der Härte ‒ Teil 1: Kugeleindruckversuch 2 thermische Werkstoffeigenschaften 2.1 Wärmeformbeständigkeit [Flex B] Prüfart Mes
MATED s.r.l. Via Praga 22 38121 Trento TN UNI CEI EN ISO/IEC 17025:2018 Revisione: 18 Sede A Quantità e dimensione dei difetti dopo corrosione in nebbia cupro salina acetica (CASS)/Quantity and dimension of defects by exposing copper-a
DIN EN ISO 11357-2 2020-08 Kunststoffe - Dynamische Differenz -Thermoanalyse (DSC) - Teil 2: Bestimmung der Glasübergangstemperatur und der Glasübergangsstufenhöhe DIN EN ISO 11357-3 2018-07 Kunststoffe - Dynamische Differenz -Th
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1.9 Shear strength DIN EN ISO 14130 1998-02 Fibre reinforced plastic composites – Determination of apparent int
Test *: Test Method(s) 1,2: Resistance to Scratching FLTM BN 108-13; PV 3952; PV 3974; DBL 7384; LP-463DD-18-01; GS 97034 -2, -8 Rubber Staining Resistance ASTM D925 Rubber Chemical Resistance ASTM D471 Rubber Aging ASTM D865
ISO 75-2 ASTM D648 Plastic, Composites and Polymers Tensile (Loads: 0.05N to 100 kN) (Temperature range -50°C to +250°C) (Strain to 1000%) BS EN ISO 527-1 BS EN ISO 527-2 BS EN ISO 527-3 BS EN ISO 527-4 BS EN ISO 527-5 ASTM D
Kiwa CERMET Italia S.p.A. con socio unico Via Cadriano 23 40057 Cadriano di Granarolo Emilia BO Allegato al certificato di accreditamento n. 00001 rev. 9 del 23/01/2025 UNI CEI EN ISO/IEC 17025:2018 Revisione: 45 Sede A Data: 26/
ISO 75-2 2013-04 ASTM D 648-18 2018 ISO 178 2019-04 ASTM D 790-17 2017 ISO 179-1 2010-06 ISO 180 2019-11 ASTM D 256- 23e1 2023 ISO 306 2022-11 ISO 527-1 2019-07 ISO 527-2 2012-02 ASTM D 638-22 2022 ISO 1133-1 2022-06 ASTM D 1238- 23 2023 Va
DIN EN ISO 75 -2 2013-08 Kunststoffe - Bestimmung der Wärmeformbeständigkeitstemperatur – Teil 2: Kunststoffe und Hartgummi (hier: Verfahren A und B) DIN EN ISO 306 2023-03 Kunststoffe - Thermoplaste - Bestimmung der Vicat - Erweic